Main functions 
The product can be used in monitoring and protecting axial position of turbine, water turbine, compressor, blower and other rotating machineries.

Function description:

1. Display function
2. Alarm function
3. Alarm-delay time setting function
4. Self-diagnostic function
5. Output interface

Technical parameters:

1. Sensor input: SDW-5 type eddy current displacement sensor, frequency response:0～5KHz
2. Display mode: 4-bit 0.8-inch LED display, accuracy:±0.5％
3. Measurement range: -2.0～+2.0mm(it is produced as ±1.5mm if there is no special requirement)
4. Current output: 4～20mA or 0～10mA, load≦500Ω
5. Alarm contact capacity: AC220V/3A, DC28V/3A
6. Work environment: temperature: 0～55℃ Relative humidity: ≤95%
7. Power supply: AC 220VAC±10% 50Hz Power consumption≤10W
8. Installation: disk type
9. Machine size: 160 (width)×80 (height)×250 (depth)mm
10. Hole size: 152 (width)×75 (height)mm

Order guide:

1. MZC-1 type axial displacement monitor must be configured with SDW-5 type eddy current sensor.
2. Model code:
MZC-1—A□□—B□□—C□□—D□□—E□□
8200/031/032—A□□—B□□—C□□—D□□—E□□

Range selection A□□:
0 1—— -0.5～0～+0.5mm
0 2—— -1.0～0～+1.0mm
0 3—— -1.5～0～+1.5mm
0 4—— -2.0～0～+2.0mm 
Current output B□□:
0 1—— 4～20mA
0 2—— 0～10mA
Sensor selection : C□□(SDW-5 type eddy current sensor):
0 1—— Ф8mmSensor
0 2—— Ф11mmSensor
0 3—— Ф18mmSensor
Alarm delay :D□□:
0 1—— 0.1 sec.
0 2—— 1 sec.
0 3—— 3 sec.
Direction of mounting E□□:
0 1—— remote probe is increased
0 2—— remote probe is reduced