Function description:

1. Display function
2. Alarm function
3 Alarm-delay time setting function
4. Self-diagnostic function
5. Output interface

Technical parameters:

1. Input signal: SDW-5 eddy current sensor system, frequency response:0～5KHz
2. Display mode: 2-bit semi-LED display, accuracy:±0.5％
3. Measurement range: 0～500um
4. Current output: 4～20mA load ≤500Ω
5. Power output: -24VDC
6. Alarm contact capacity: AC220V/3A, DC28V/3A
7. Work environment: temperature: 0～55℃ Relative humidity: ≤95%
8. Power supply: AC 220VAC±10% 50Hz Power consumption≤10W
9. Installation: disk type
10. Machine size: 160 (width)×80 (height)×220 (depth)mm
11. Hole size: 152 (width)×75 (height)mm

Order guide:

1.MEC-1 type eccentric monitor is configured with SDW-5 type eddy current displacement sensor.
2. Model code:
MEC-1—A□□—B□□—C□□—D□□—E□□
8200/061/062—A□□—B□□—C□□—D□□—E□□

Range selection A□□:
0 1—— 0～100um
0 2—— 0～200um
0 3—— 0～500um
Current output B□□:
0 1—— 4～20mA
0 2—— 0～10mA
Sensor selection C□□ (SDW-5Eddy current sensor):
0 1—— Ф8mmSensor
Alarm delay D□□:

0 1—— 0.1 sec.
0 2—— 1 sec.
0 3—— 3 sec.