MZD-1S type dual channel vibration severity monitor is configured with SPZ-5 typw vibration velocity sensor.

Main functions 
The product can be used in monitoring and protecting bearing pad vibration of turbine, water turbine, compressor, blower, and other rotational machineries.

Function description:

1. Display function
2. Alarm function
3. Alarm-delay time setting function
4. Self-diagnostic function
5. Output interface

Technical parameters:

1. Sensor input: SZP-5 vibration velocity sensor, sensitivity: 20mV/mm/S±1%, Frequency response: 5～1000Hz
2. Display mode: 3-bit digital tube display, accuracy:±0.5％
3. Measurement range: 0～500μm (peak value)
4. Current output: 4～20mA or 0～10mA, load≦500Ω
5. Alarm contact capacity: AC220V/3A, DC28V/3A
6. Work environment: temperature: 0～55℃ Relative humidity: ≤95%
7. Power supply: AC 220VAC±10% 50Hz Power consumption≤10W
8. Installation: disk type
9. Machine size: 160 (width)×80 (height)×250 (depth)mm
10. Hole size: 152 (width)×75 (height)mm

Order guide:

1.MZD-1S type vibration severity monitor must be configured with SPZ-5 type vibration velocity sensor.
2. Model code:
MZD-1S—A□□—B□□—C□□—D□□
8200/011/012—A□□—B□□—C□□—D□□

Range selection A□□:
0 1—— 0～10.0mm/S;
0 2—— 0～20.0mm/S;
0 3—— 0～50.0mm/S
Current output B□□:
0 1—— 4～20mA;
0 2—— 0～10mA
Sensor selection C□□ (SPZ-5 vibration velocity sensor):
0 1—— SPZ-5 type
Alarm delay D□□:
0 1—— 0.1 sec;
0 2—— 1 sec;
0 3—— 3 sec.